ADIN1200 Datasheet | Analog Devices

FEATURES - 10BASE-Te/100BASE-TX IEEE® 802.3TM pliant - MII, RMII and RGMII MAC interfaces - 100BASE-TX RGMII latency transmit: <124 ns, receive <250 ns - 100BASE-TX MII latency transmit: <52 ns, receive <248 ns - Programmable RGMII timing delay and drive current - Supports TSN - EMC test standards - IEC 61000-4-5 surge (±4 k V) - IEC 61000-4-4 electrical fast transient (EFT) (±4 k V) - IEC 61000-4-6 conducted immunity (10 V) - EN55032 radiated emissions (Class A) - EN55032 conducted emissions (Class A) - Unmanaged configuration using multilevel pin strapping - MDIO/MDC management interface and interrupt pin - EEE in accordance with IEEE 802.3az - Start of packet detection for IEEE 1588 time stamp support - Enhanced link detection - Cable diagnostics (TDR and signal analysis) - Configurable LED - Crystal oscillator/clock input: 25 MHz - 25 MHz/125 MHz synchronous clock output - Jumbo frame support up to 16 k Bytes - Synchronous Ethernet (Sync E) clock recovery - 32-lead, 5 mm × 5 mm LFCSP small package - Wide temperature range: specified for - 40°C to +105°C and - 40°C to +85°C ambient operation - Low power consumption - 139 m W for 100BASE-TX - 3.3 V/2.5 V/1.8 V MAC interface VDDIO supply - Single-supply operation with 3.3 V VDDIO - Integrated power supply monitoring and POR APPLICATIONS - Industrial automation - Process control - Factory automation - Robotics and motion control - Time sensitive networking (TSN) - Building...